HORIZONTAL CYLINDRICAL TRIPLE WALLED HIGH PRESSURE AUTOCLAVE S.S LINING
- Availibility: In Stock
- Categories : LABORATORY INSTRUMENTS
- Download-Pdf:
Model No: AGN-810A
It is a robust sterilization unit designed for high-efficiency sterilization under pressure. Its inner and outer chambers, steam jacket, and boiler are constructed from heavy-gauge stainless steel with leak-proof argon arc welding. The space between the outer chamber and steam jacket is insulated with glass wool to reduce thermal losses, ensuring energy efficiency. Hydraulically tested to withstand 2.5 times the working pressure, this autoclave provides maximum safety to personnel. The system incorporates multiple safety features, precise control mechanisms, and convenient operation to ensure reliable and effective sterilization.- Heavy-gauge SS construction – inner/outer chamber, steam jacket, and boiler.
- Glass wool insulation between outer chamber and steam jacket to minimize heat loss.
- Hydraulically tested to 2.5× working pressure.
- Steam boiler equipped with:
- Water level indicator
- Pressure gauge
- Low water cut-off device
- Automatic pressure control system
- Fitted with safety valves on boiler and chamber for personnel protection.
- Side-bottom drain valve for easy cleaning and draining.
- Two separate valves for steam evacuation from inner chamber and jacket.
- Sterilization cycle controlled by single-point multiport valve.
- Moisture trap on chamber discharge line prevents wetting of sterilized materials.
- Automatic vacuum breaker standard for safe vacuum release.
- Flanged immersion-type heating element ensures fast pressure formation and is protected by low water cut-off device.
- Triple safety features:
- Piezo state automatic pressure control
- Spring-loaded safety valve on boiler
- Dead weight release valve on chamber
- Operates on 220/230V or 440V, 3-phase, 50Hz AC supply.
- Automatic pressure cut-off switch
- Digital temperature indicator cum controller
- Vacuum breaker
- Water level indicator
- Automatic self-locking system
- Automatic low water cut-off switch
- Moisture trap
- Multiport valve
- Fully automatic PID purging system
- HMI PLC-based autoclave with data logger
- Digital pressure indicator cum controller
- Fully digital temperature-controlled system
- Gasket: Jointless silicon rubber
- Exhaust Pressure: Manual through exhaust valve
- Sterilizing Pressure: 1.2–2.5 kgf/cm² (15–35 psi) at 121°C–134°C
- Operating Pressure: 15–35 psi
- Pressure Gauge: 0–2.1 kgf/cm² (up to 60 psi)
- Tubular Stand & Supporting Ring: SS 304 Grade Stainless Steel
- Pressure Vessel: SS 304 Grade Stainless Steel
- External Wall: SS 304 Grade Stainless Steel
- Tray: SS 304 Grade Stainless Steel
- Top Lid: SS 304 High-Grade Stainless Steel
| Dimension (inch) | 16×24 | 16×36 | 16×48 | 20×36 | 20×48 | 22×48 | 24×48 |
| Inner Dimension (mm) | 400×600 | 400×900 | 400×1200 | 500×900 | 500×1200 | 550×1200 | 600×1200 |
| Capacity | 78 Liters | 115 Liters | 162 Liters | 165 Liters | 221 Liters | 300 Liters | 350 Liters |
| Heater Load | 6 kW | 6 kW | 9 kW | 9 kW | 12 kW | 12 kW | 12 kW |
Saina Paul
Donec viverra sodales arcu gravida nibh at. Neque lobortis quis porta integer et placerat lectus scelerisque. Velit eget malesuada morbi faucibus at sed euismod. Tortor, eu ut id tincidunt leo placerat luctus
Nicole Lana
Donec viverra sodales arcu gravida nibh at. Neque lobortis quis porta integer et placerat lectus scelerisque. Velit eget malesuada morbi faucibus at sed euismod. Tortor, eu ut id tincidunt leo placerat luctus
Abela Lust
Donec viverra sodales arcu gravida nibh at. Neque lobortis quis porta integer et placerat lectus scelerisque. Velit eget malesuada morbi faucibus at sed euismod. Tortor, eu ut id tincidunt leo placerat luctus
Add Review